- 120W, replaces metal halide bulbs in shoebox, wall pack and canopy lights.
- Meanwell LED Driver
- 5 year warranty
- Power: 120W PHILIPS Chips
- Lumen: 15000LM
- Certificates: DLC, UL,cUL,SAA,ERP,CE,ROHS
- Voltage: AC90-277V
- Beam Angle: 110X130º
- Color temperature: 3000K,4000K,5000K
- CRI: 80Ra
- Dimension: 6.8”x4.9”x1.2”
- 5 Year Warranty
|LED Lifetime||67,000 Hours|
|Temperature Range||(-)20ºC to (+)45ºC|
|Dimensions (in)||6.8″ x 4.9″ x 1.2″|
|Operating Voltage||AC 100-277V|
Download Product Cut Sheet
What is LED retrofit kit?
An LED retrofit kit involves an LED driver and an LED light panel to be installed in a fixture to replace the existing light for a higher efficiency LED lamp.
Do I need an LED retrofit kit?
Why do you need a retrofit LED kit? Converting old light fixtures or upgrading to LED light bulbs will not only reduce energy costs, but also provide more options such as sensors and lighting controls which help improve the safety and security around your industrial, commercial, or residential property.
How much does an LED conversion cost?
They usually depend on how many fixtures are involved and the extent of the work. Swapping older light bulbs for new LEDs throughout a home is straightforward and can often be completed for $100-$200. Fitting conversion kits or replacing fixtures requires more time and could cost $50 to $150 per fixture.
Is it worth upgrading to LED?
One of the most obvious benefits of LED lighting upgrades is the reduction of energy consumption. When traditional lighting is replaced with LED lighting at the same brightness, facilities can see savings that would pay for the LED investment over the course of two or three years.
Can you replace any light with LED?
Yes, in many cases, you can simply replace your bulbs separately, one by one. We guide you through the most important steps for selecting replacement LED bulbs for most commonly used fittings. If your bulbs require a voltage level other than the usual 230V, some additional elements need to be taken into account.
Do I need to remove the ballast to use an LED bulb?
An LED light does not require a ballast because it uses a component called a “driver” to regulate the power going into the bulb.
How much does a electrician cost install LED light?
Labor. The cost for an electrician to install recessed can or can less LED lights will generally be between $200 and $250 per fixture. Professionals charge at a rate of $85 to $105 per hour and each installation takes approximately two to three hours.
Are LED worth the money?
LEDs use 85% less energy and last 25 times as long as incandescent lights. On average, homeowners save about $1000 over a decade by converting their lights to LEDs. You can use a savings calculator like this one to find out exactly how much less you’ll pay depending on how much you change and where you live.
How long do LED lights last?
The average lifespan of an LED is often rated up to 50,000 hours. This is about 50 times longer than a typical incandescent, 20-25 times longer than a typical halogen and 8-10 times longer than a typical CFL. If used 12 hours a day, an LED rated at 50,000 hours will last more than 11 years.