LED Portable Explosion Proof Light


EX-MV01 LED Portable Explosion Proof Light is the world’s first Class I Division 1, ATEX Zone 0 and IECEx ia safety certified remote area light. Now you can take remote area lighting to hazardous areas around the globe.  The 125° beam angle along with up to 1,600 lumens and providing up to 10 hours of run time, this LED Lantern will support full work shifts and deliver safe situational awareness.




  • 3 pre-set light output levels
  • Up to 1,600 lumens (calculated)
  • Up to 10 hrs of run time
    Full time battery level indication with low level flashing indicator
  • Deployable mast with 360 degree rotation
  • Multiple deployment positions
  • Valid over the entire temperature range from -20°C to 40°C (-4 ºF to 104ºF)


  • UL913:
    • Class I, Division 1, Groups A, B, C and D, T4
    • Ex ia IIC T4 Ga
    • Class I, Zone 0, AEx ia IIC T4 Ga
    • Ex ia IIC T4 Ga
  • ATEX
    • II 1G Ex ia IIC T4 Ga


Body Plastic
Head Aluminum alloy
Lens Plastic
Lumens (Max) 1600lm
Lumens (Working) >500lm
Lamp Heads 1
Lamp Type LED
Beam Spread 125°
IP Rating IP20
CCT Range 3000K-6500K
Run Time 10 hrs (Max)
Battery Type Ni-MH
Battery capacity 10.8V, 9Ah
Rated Power 5W-19.5W
Rechargeable Yes
Charging Volts DC10.8V-14.4V
Battery Level Indicator Full-time battery level display and low battery warning (visible flashing)
Volts 10.8V(Battery); AC100V/277V(Charger)
Weight 15.4 lbs (7kg)
Light Modes High / Low / Flashing
Dimension(L×W) 355mm[14.0″]×205mm[8.1″]
Deployable Height 1 Min.567mm[22.3″], Max.800mm[31.5″]
Deployable Height 2 Min.636mm[25.0″], Max.910mm[35.8″]
Color Yellow

Download Product Cut Sheet

Knowledge Base

What is Class 1 Division 1 LED lighting?

Class 1 Div 1 LED Lighting (C1D1) is explosion-rated lighting designed to work in explosive environments where hazardous conditions and concentrations of flammable combustible vapors, liquids or gases, are always present. Class 1 Areas are defined as groups and are categorized by the type of material found.

What is class1 luminaire?

Class 1 Division 1 LED lighting is used in industrial buildings to reduce the risk of high voltage equipment igniting flammable substances. Typical Class 1 Division 1 lights are designed to be explosion proof, making them suitable for exposure to these volatile chemicals.

What is a Class 1 Div 1 area?

A Class I, Division 1 area encompasses the combination of Zone 0 and Zone 1 areas. An area where ignitable concentrations of flammable gases, vapors or liquids are present continuously or for long periods of time under normal operating conditions.

What is the difference between ATEX and explosion proof?

ATEX and ex-proof classifications help manufacturers select and install equipment for potentially explosive atmospheres. ATEX is used in Europe, whereas Ex-Proof is used in North America and Canada. The process environment and properties of any materials that will be present need to be ascertained.

What makes a light explosion proof?

To be certified, explosion-proof lights typically will be made of durable, non-sparking material, a very thick glass globe over the bulb, and other features to ensure that the worker and the surrounding environment remains safe should an ignition occur inside the light.

Where can you use explosion proof lighting?

Hazardous Area/Explosion Proof lights are available for a wide variety of applications. Examples include linear wall/ceiling fixtures, flood lights, dock lights, high bay lights, wall packs and shop lights.

What class is explosion proof?

There are three classes of explosion proof lights known as Class I, Class II, and Class III. These are the broadest sense in which explosion proof lights are distinguished from each other. The classes are each broken down further into two separate divisions.

Is explosion proof the same as intrinsically safe?

Therefore, Intrinsically Safe means that an apparatus, such as a temperature transmitter is not capable of causing an explosion. Explosion Proof means that should an explosion occur, it will be contained within an enclosure.

What is ATEX Zone 1 certification?

Zone 1 – Explosive mixtures are present intermittently. Category 2 or 1 equipment required.

Zone 2 – Explosive mixtures are present abnormally or infrequently. Category 3, 2, or 1 equipment required.

Can you use Ex e in Zone 1?

Hazardous area Ex e isolators provide safe electrical isolation for low voltage power in Zone 1 & Zone 2 (gases) and Zone 21 & Zone 22 (dusts) explosive atmospheres.

What is explosion proof type?

Ex-Proof housing contains either cast aluminum or stainless steel, with sufficient mass and strength to subdue ignition, should flammable substances penetrate the internal electronics.

Bulk Order / Custom Quote

Need to order in bulk volume or with custom requirements? Please use the form below: